The Ideal 1/10 Scale RC Car for Off-Road Adventures.

Authorized by Toyota, the 1/10 Land Cruiser 80 from FMS Models adopts the FCX10 crawler chassis, which faithfully provides the off-road performance
of the original car.

To ensure durability, the body is moulded in a PC material and is equipped with mirrors and waders. Through the transparent windows you can see a detailed driver figure, ex-quisite dashboard and cockpit interior. The roof is equipped with a luggage rack and four offroad lights, while a climbing ladder is mounted at the rear. The vehicle comes pre-installed with headlights, front turn signals, side turn signals, rear turn signals, reverse lights and other lighting components. The bodyshell uses a magnetic interface to draw power from the chassis, allowing the lights of the entire vehicle to be activated with a single button on the remote control. Additionally, we also have pre-installed fenders to keep mud from spilling onto the body and chassis.

The whole chassis adopts the mainstream middle front power layout with four-link sus-pension. The mid-front motor and transmission, as an integral unit, have a lower center of gravity compared to similar products, resulting in a lower roll centre and a reduced likelihood of rollovers. Meanwhile, metal-geared waterproof servos placed to the side of battery compartment are responsible for switching high and low speeds.

In terms of convenience and daily maintenance, FMS has given this good consideration. The battery compartment can be flipped back or “quick release”. The electronic equip-ment is concentrated within the middle of the chassis, providing convenient mainte-nance, removal or replacement. FMS have innovatively designed a knob-type quick re-lease structure, and at the same time, the power and signal cables of the lights are per-fectly
integrated with the magnetic module.

Except for an adventurous heart, you don’t need to prepare anything, FMS will take you on your off-road journey

Features

• TOYOTA authorized car body.
• Detailed interior w/Driver Figure.
• Rich lighting effects.
• LC80 exclusive wheel hub.
• Off-road front bumper (daytime light included).
• High and low speed transmission.
• Solid axle.
• Quick release structure (patented).
• Magnetic light control.
• Metal height adjustable shock absorber.
• Metal gears.
• Full ball bearing.
• Waterproof Class: Splash-proof.
• 550 32T Brushed Motor.
• Speed (Low & High Gear): 10km/h / 22km/h.
• Steering Servo: 25KG Metal Gear (Waterproof).
• 13g Metal Gear servo.

Specifications

Product Size: 572*251*288mm
Steering Type: Front 2WS
Drive System: 4WD
Waterproof Class: Splash-proof
Motor: 550 32T Brushed Motor
Bearing: Full Bearing
Driving Speed (Low & High Gear): 10km/h / 22km/h
Steering Servo: 25KG Metal Gear 25.5Kg.cm (Waterproof)
Shift/Differential Servo: 13g Metal Gear servo
Remote Distance: 150m in clear space
Battery Compartment Size: 140*47*40mm
Play Time: 30min (3S 5000mAh 35C)

What's Included

• 1 x 1:10 FCX10 LC80 Toyota Land Cruiser 80 RS
• 1 x 2.4GHz MG6 Radio
• 1 x 2-in-1 R6D Receiver / 60A ESC (installed)
• 1 x Product Manual

Needed To Complete

• 4 x AA Batteries for Transmitter
• Battery and Charger for Kit (Recommended 2S 5000mAh, 3S 5000mAh XT60 plug)