Sem produtos
As nossas Marcas
Catálogo
Servos Existem 53 produtos.
-
MAXPRO 3003 Standart Analog Servo
Specifications: Gear: Nylon Torque: > 3,5 - 4 kg.cm Speed: > 0,16 - 0,14 seg.60° Operating Voltage: > 4,8V. - 6V. Dimensions: 40,3 x 19,8 x 38,6 mm. Weight: 36 gr. Includes Arms servo and accessoires
7,15 €Em stock -
MAXPRO 3050 Micro Digital Servo
Specifications: Gear: Metal Torque: > 3 - 3,5 kg.cm Speed: > 0,12 - 0,10 seg.60° Operating Voltage: > 4,8V. - 6V. Dimensions: 23,2 x 12 x 29,5 mm. Weight: 11 gr. Includes Arms servo and accessoires
10,98 €Em stock -
MAXPRO 3001 Micro Analog Servo
Specifications: Gear: Nylon Torque: > 1,9 - 2,1 kg.cm Speed: > 0,11 - 0,09 seg.60° Operating Voltage: > 4,8V. - 6V. Dimensions: 23,2 x 12 x 24,8 mm. Weight: 9 gr. Includes Arms servo and accessoires
5,53 €Em stock -
MAXPRO 3004 Standart Analog Servo
Specifications: Gear: Nylon Torque: > 6 - 7 kg.cm Speed: > 0,16 - 0,14 seg.60° Operating Voltage: > 4,8V. - 6V. Dimensions: 40,3 x 19,8 x 38,6 mm. Weight: 37 gr. Includes Arms servo and accessoires
8,54 €Em stock -
Futaba S3003 Standard Servo
This is the Futaba S3003 Standard Servo. This basic servo is used in cars, boats, or where standard servos are used. This is the replacement for the following servos, S138,S148,S22,S38 and S12. This servo can produce high-current draw from your...
7,97 €Em stock -
-
-
MAXPRO 3002 Micro Analog Servo
Specifications: Gear: Nylon Torque: > 1,9 - 2,1 kg.cm Speed: > 0,11 - 0,09 seg.60° Operating Voltage: > 4,8V. - 6V. Dimensions: 23,2 x 12 x 24,8 mm. Weight: 9 gr. Includes Arms servo and accessoires
6,42 €Em stock -
-
Futaba S3001 Standard Ball Bearing Servo
This is a Standard Servo with a Ball Bearing on the output shaft. This has a "J" connector and uses a nylon gears. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of...
11,79 €Em stock -
-
-
-
-
