Free yourself. Be a warrior.
3-Axis Stabilized Handheld Gimbal System
Developed for the filmmaking professional, the DJI Ronin marks a generational leap in camera stabilization technology. Its custom sensors, powerful motors and advanced algorithms put world-class precision in your hands.
Save Time on Set
Once your camera is configured, the Ronin can be ready to shoot in as little as 5 minutes, saving time and increasing efficiency on set. The built-in ATS (Auto Tune Stability) technology intelligently tunes Ronin to your camera rig at the touch of a button.
Transform tilt and pan movements on the Ronin into smooth and stabilized camera angle changes
3 Operation Modes
3 different modes of operation allow the Ronin to be used in different scenarios, all of which can be entered without changing settings on the Ronin Assistant app or a 2nd operator remote. SmoothTrack functionality remains in all three modes.
- Upright Mode
Flip the gimbal over to bring the camera closer to eye level for a higher perspective without straining to lift it. Use this mode when sticking the Ronin out of a car’s sunroof or when trying to shoot over a crowd of people.
- Underslung Mode
The default gimbal operation is the Underslung mode. The camera can be comfortably held low to the ground, at chest level or anywhere in between. This mode is also used when the Ronin is suspended from a camera jib or crane.
- Briefcase Mode
When a slimmer gimbal profile is needed, i.e. when moving through doorways or narrow paths, Briefcase mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.
Extremely Durable, High Build Quality
Made from precision machined aircraft-grade aluminum, the Ronin offers the durability to withstand rugged use on set and meets the high demand for reliability. No loose cables or zip ties give it a clean, professional appearance.
Mobile Bluetooth Assistant Software
The feature-rich iOS and Android DJI Assistant software allows easy setup of all system configurations. The PC and Mac Assistant also provides control of all the Ronin’s functionalities in addition to firmware upgrades for future features.
- Supports Cameras up to 16 Pounds
- Precision of Control: ±0.02°
- Transmitter for Remote Pan/Tilt Control
- Tool-Less Balance Adjustment System
- Assistant Software for iOS and Windows
- Bluetooth Wireless Interface for Setup
- 15mm Rods + Mount Points for Accessories
- USB and PowerTap Power Outputs
- Included Hard Case Holds Gimbal and More
1-Three Operation Modes
· Underslung Mode
· Upright Mode
· Briefcase Mode
2-Built-in independent IMU module
3-DJI Specialized Gimbal Drive Motors with Encoders
8-DJI Advanced 32-Bit DSP Processor
Accessory Power Connections - 12V regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power - 4S Ronin Battery
Connections - 2.4GHz Remote Control, Bluetooth, USB
PC Assistant Software Requirements - Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mobile Assistant Software Requirements - iOS version 6.1 or above Mobile Device iPhone 4s, iPhone 5, iPhone 5s, iPod touch 5 , iPad 3, iPad 4, iPad mini
Mechanical & Electrical Characteristics
- Static current: 300mA (@16V)
- Dynamic current: 600mA (@16V)
- Locked motor current: Max 10A (@16V)
Operating Temperature | -15°C ~ 50°C (5°F ~ 120°F)
Weight - 4.20kg (9.26lbs) fully loaded with handlebar
Gimbal Dimensions - 620mm(W) x 280-380mm (D)x 500mm(H)
Supported Camera Dimensions
- Maximum depth at center of mass on camera base plate: 140mm
- Maximum height measured from top of camera base plate: 225mm
- Maximum width: 195mm
Load Weight (Reference Value) - 7.25kg (16lbs)
Angular Vibration Range - ± 0.02°
Maximum Controlled Rotation Speed
- Pan axis: 90°/sec
- Tilt axis: 100°/sec
- Roll axis: 30° /sec
Controlled Rotation Range
- Pan axis control: 360°
- Tilt axis control: Up 45° to Down 120°
- Roll axis control: ± 25°