ORACOVER^®Model aircraft covering that makes your dreams come true.

ORACOVER^®, our leading product for covering RC model airplanes is patented worldwide.

ORACOVER^® is manufactured using only virgin polyester granulate and not recycled material to ensure the best product characteristics.

Because ORACOVER^® is made from genuine special polyester produced using A-B-A technology, it is extremely tear-resistant and gives your model additional stability. Due to the patented polymerised multi-layer system, the colour layer of ORACOVER^® is practically indestructible, and the edge bleeding known from conventional films, caused by ironing the seams, is non-existent with ORACOVER^®.

The film is distinguished by its unique processing qualities. If you make a processing mistake, you always have a second chance. ORACOVER^® does not form bubbles or wrinkles, when applied according to the processing instructions.

ORACOVER's^® specially formulated heat-sealing glue is adhesive at temperatures from 80 °C, meaning that even model construction parts with a hard foam core can be covered without any problems.

ORACOVER^® is overcoatable with all ORACOLOR^® paints.

Characteristics: • Iron-on • Blow-dryable • Fuel resistant • Temperature resistant up to 250 °C • Can be overcoated • Heat-activated glue • ORACOVER does not form bubbles or wrinkles, when applied according to the processing instructions.

Technical data: • Roll lengths: 2 m, 10 m, 20 m, 50 m, 100 m, 150 m and 250 m • Roll width: 60 cm • Polyester film with colour and glue coating (thermo-activable) • Material thickness: approx. 45 - approx. 65 ?m • Carrier film: 23 ?m • Weight: approx. 54 - approx. 109 g/m² (depending on colour) • Pull strength (lengthwise & crosswise): min. 283 N / 50 mm • Breaking stretch (lengthwise & crosswise): min. 90% • Shrinkage: min. 5% biaxial (based on 150 °C) • Melting point: 250 °C • Adhesive strength: min. 5 N / 25 mm

Information: • Our colours are not identical to the RAL colour palette. • Our range of paints includes colour-matched ORACOLOR^® paint, hardener and thinner for many of our films and fabrics.

Versatile tubes offer added value for model rocket building Our high-quality film and fabric rolls offer model-making enthusiasts real added value and actively promote the fascinating hobby of model rocket building. The sturdy roll tubes are ideal as fuselage tubes for model rocket construction and can be easily combined with standard accessories such as nosecones, fins, propellant charges and other components available from specialist retailers (e.g. at raketenmodellbau-klima.de). For a personalised, professional finish, the tubes can be decorated with our ORACOVER and ORASTICK films. This allows you to create a unique rocket design in no time at all, one that impresses both visually and technically. You can also buy the tubes individually from us.