JOYSWAY DRAGON FLITE 95 V3 RACING SAILING YACHT ARTR

The Dragon Flite 95 sailboat from Joysway is based on the same features and innovations as the RG 65 class, but with a hull length of 950 mm.

Developed by Joysway with the help of 2 of the UK's best-known experts in radio-controlled sailboat racing.

Hull moulded in resistant plastic with reinforcements, innovative hull profile, lightweight carbon keel, competition sail in a new highly resistant material. In sailing condition for competition, the Dragon Flite 95 should weigh no more than 2 kilos.

Rudder servo and sail winch servo included and installed, the new sail servo is more powerful and faster.

Sailboat ready for fun and competition.

Features

• Improved sails: Reinforcement of sail corners: Change from one patch per side to two layers of patches.
• Servo plate screws: Replaced by flat-head screws.
• Transparent hatch mold: Modified to match flat-head screws.
• Servo tray modification: Mounting holes enlarged and mounting plate secured with screws from top of tray.
• New switch mounting plate: Allows users to replace the power switch from the top of the servo tray, without having to dismantle the latter.
• Modification of the dimensions of the black cover patch for the hatch.
• New molded rudder servo arm: Reinforced arm.
• Improved metal rudder arm: Clevis hole diameter reduced from 2 mm to 1.9 mm, ensuring better rudder fit and reducing side play.
• Bearings: Switch to 404 stainless steel material.
• Mast step modifications: diameter slightly increased to improve fit.
• Reinforced main sheet clamp plate: Thicker and more robust.
• Mast deck sliding plate: Mold modification: width increased from 18.9 mm to 19.4 mm to prevent lateral oscillation thanks to a tighter fit with the top of the keel box.
• Screws, Nuts and washers for mast deck plate: as well as keel screws, replaced by 316 stainless steel.
• Aft jib boom plug: New design allows the lifting cord to be passed to the outside for easy replacement.
• Mainsail luff ring: Increased curvature to form a more pronounced hook.
• Jib stay: Use of higher-quality steel wire, shorter length and thinner copper clamps to prevent loosening of the loops.
• Bungee cords: Use of higher-quality material.
• New 2025 winch servo: For more precise sail control.

What's Included

• Hull decorated white, pre-fitted with helm and sail servos
• Ballast, centerboard and rudder to assemble.
• Mature to assemble.
• Sails (Set A) in 50-micron Mylar.
• Drum sail winch servo fitted, new version.
• Rudder servo fitted.
• Battery holder and switch with waterproof control fitted.
• Clear plastic hatch cover.

Needed To Complete

• Transmitter and receiver to be purchased separately.

Specifications

Length: 950 mm
Width: 125 mm
Mast Height: 1050 mm
Overall Height: 1470 mm
Total Sail Area: 3736 cm2
Mainsail Area: 2314 cm2
FOC Surface Area: 1422 cm2
Power Supply: 4.8v - 6v