Mais Vendidos

Produtos visualizados

Fabricantes

Team Associated RC10F6 1/10 Electric 2WD Competition Race Car Kit

ASRC10F6KIT

Novo produto

Por encomenda - 4 a 5 dias uteis

316,75 €

Adicionar à Lista de desejos

Ficha informativa

Escala 1/10
Tipo de Kit KIT
Tipo de Terreno On-Road
Tracção 2WD

Mais informação

Team Associated is proud to release its entry to the 1:10 scale 2WD electric formula car racing class, the RC10F6 Factory Team Kit, geared for precision and the ultimate in performance.

Full-scale Formula racing is considered one of the most elite forms of racing in existence, with technology and looks off the chart. The engineers behind the doors of Area 51 put maximum effort into the design of the RC10F6 FT kit to make sure the same could be said about their scaled-down version. With a full cast of setting options, an ultra-low center of mass, and sleek styling, the RC10F6 FT is designed to put you at the front of the Formula grid.

With an increase in entries greater than any class at the highly contested ETS series, Formula is growing at a rapid rate. All aspects of the RC10F6 FT were considered and optimized to make sure it would stand above its competition. Performance, adjustability, durability, and style were weighed heavily, and the RC10F6 FT kit shows its hand with a complete package of adjustments and options right out of the box. From front to back, with graphite control arms, the fully adjustable front end, the ultra-smooth rear pivot, and wings styled after current full-scale Formula rulings, no corner was left untouched. At an affordable price point, the RC10F6 FT comes with everything to assure you will be at the front of the pack. With such a well-balanced platform, it's easy to see that the RC10F6 FT kit is another Champion by Design from Team Associated!

Prototype shown. Due to ongoing R&D, photos may not match final kit. RC10F6 Factory Team Kit shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.

Features

  • 2.5mm graphite chassis for optimized flex characteristics
  • Front and rear wings modeled after 2017 Formula rules included
  • FOX(R) Genuine Kashima Coat center shock for minimal friction and extended wear
  • Chassis design allows for multiple battery configurations
  • New center pivot design for optimized rear pod assembly
  • Lightweight graphite axle for increased durability and rigidity
  • Differential thrust bearing assembly for smooth action and extended life between rebuilds
  • Rear axle accepts all standard spur gears without adapter
  • Two steering bellcrank options for fine tuning Ackermann and steering rate
  • Servo mounts can be switched from "fixed" to "floating" to allow more flex in the front of the chassis
  • Integrated droop posts for adjusting droop without disassembly

Vehicle Specifications

Power Source: Electric
Terrain: On-Road
Body Style: F1
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 432.5mm (17.03in)
Width: varies
Wheelbase: varies
Weight: 345*g (0.76lbs)
Internal
Gear Ratio:
1:1
Drive: 2WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

  • 1:10 scale electric motor
  • Electronic speed control
  • 3.7V-7.4V LiPo, or 6.0V LiFe with "shorty" battery dimensions
  • Battery charger (suited for one of the batteries mentioned above)
  • 2-channel surface transmitter
  • 2-channel receiver
  • Steering servo
  • 1:10 scale Lexan(R) formula body
  • Lexan(R) specific spray paint for body
  • 1:10 scale formula wheels and rubber (or foam) formula tires
  • Helpful Item: Silicone Shock Fluid (Refer to catalog for complete listings)
  • Helpful Item: Silicone Diff Fluid (Refer to catalog for complete listings)
  • Helpful Item: Body scissors (AE Part #1737)
  • Helpful Item: Reamer/Hole Punch
  • Helpful Item: FT Hex Wrenches (AE Part #1518)
  • Helpful Item: FT Nut Drivers (AE Part #1519)
  • Helpful Item: FT Turnbuckle Wrench (AE Part #1111)
  • Helpful Item: Hobby knife
  • Helpful Item: Needle nose pliers
  • Helpful Item: Wire cutters
  • Helpful Item: Soldering iron
  • Helpful Item: Calipers or a precision ruler

Oficina

REPARAÇÕES - MANUTENÇÕES - UPGRADES

Garantimos as reparações no seu equipamento de radiomodelismo, desde os Drones, Carros, Helis, Aviões ou Barcos, contando com uma oficina própria e pessoal especializado. (estático, rádio controle, reparação electrónica, etc.)

Pode contar com um serviço de excelência, com aconselhamento dos acessórios ou peças ajustado às suas necessidades e com a garantia da qualidade que os nossos serviços oferecem.

Sabemos que nem todos são experientes e muitas vezes os primeiros passos no radiomodelismo são obscuros e difíceis, mas estamos cá para o ajudar e acompanhar na evolução do seu conhecimento deste fabuloso hobby.

Quer evoluir o seu veículo? Pois conte connosco no melhor aconselhamento para fazer um upgrade completo, por fases ou mesmo para acrescentar o acessório que tanto quer mas não tem o conhecimento suficiente para o aplicar.

Conte connosco, conte com orçamentos grátis, claros e sem surpresas no final.

Comprado na SVModelismo ou noutra loja, o seu veículo é sempre bem tratado com os nossos técnicos e com uma oficina completa.

Clique aqui e marque já uma visita ou peça o seu orçamento grátis!

30 outros produtos na mesma categoria: