Viewed products

Manufacturers

Hitec HS-5485HB Standard Karbonite Digital Sport Servo

HT5485HB

New product

In stock

31,29 € tax incl.

Add to wishlist

Data sheet

Servo Type Digital
Torque + 5 - 10 Kg
Gear Karbonite

More info

Product Description

The HS-5485HB is Hitec's lowest price digital servo and is an excellent choice for sport airplanes up to .60 size. Featuring a programmable digital circuit and our Karbonite™ gear technology that offers four times the strength as our standard nylon gears and after hundreds of thousands of cycles won't show any signs of wear. 

  • Applications: Heli's and Aircraft up to 72" or up to 12lbs when using just one servo per control surface.
  • Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
  • Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.

Features

  • Our Most Economical Standard Size Digital Servo
  • Powerful Three-Pole Fettite Motor
  • High Impact Karbonite Gears
  • Top Ball Bearings
  • Standard Performance Digital Circuit for Precise Centering and Holding Power

Programmable Functions

  • End Point Adjustments
  • Direction
  • Fail Safe
  • Dead Band
  • Speed (Slower)
  • Data Save / Load
  • Program Reset

Accessories

  • Karbonite Gear Set
  • Plastic Case Set
  • Applicable Horns

Specifications

Operating Voltage Range (Volts DC): 4.8V ~ 6.0V
Speed (Second @ 60°): 0.20 ~ 0.17
Maximum Torque Range oz. / in.: 72 ~ 89
Maximum Torque Range kg. / cm.: 5.2 ~ 6.4
Current Draw at Idle: 10 mA
No Load Operating Current Draw: 170 mA
Stall Current Draw: 1,200 mA
Dead Band Width: 4 µs
Dimensions (Inches): 1.57 x 0.78 x 1.49
Dimensions (Metric): 39.8 x 19.8 x 38.0
Weight (Ounces): 1.59
Weight (Gram): 45.0
Circuit Type: G1 Programable Digital
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Karbonite
Bearing Type: Top Ball Bearing
Output Shaft (type / Ømm): Standard 24
Case Material: Plastic
Dust / Water Resistance: N / A
Connector Gauge (AWG) / Strand Count: 25 / 40

Workshop

REPAIRS - MAINTENANCE - UPGRADES



We guarantee repairs to your radio equipment, from Drones, Cars, Helis, Planes or Boats, with its own workshop and specialized personnel. (static, radio control, electronic repair, etc.)

You can count on a service of excellence, with advice of accessories or parts adjusted to your needs and with the guarantee of the quality that our services offer.

We know that not everyone is experienced and often the first steps in radiomodelismo are obscure and difficult, but we are here to help and follow you in the evolution of your knowledge of this fabulous hobby.

Want to evolve your vehicle? Well, you can count on the best advice to do a complete upgrade, in phases or even to add the accessory that you want but do not have enough knowledge to apply it.

Count on us, count on free budgets, clear and without surprises in the end.

Purchased at SVModelismo or another shop, your vehicle is always well treated with our technicians and with a complete workshop.

Click here and bookmark a visit or ask for a free quote!

30 other products in the same category: