The successful TRIPLE models have been expanded with a new version of the fuselage construction and now offer even more options for combining fuselage and wings. The fuselage of the Triple Neo consists of a GRP fuselage boat and a carbon fiber tube that serves as a tail boom. Optionally, each model can be built as a glider or electric glider. A special template is included for this purpose, with which the tip of the fuselage can be easily removed. Engine camber and side pull are automatically set correctly.

The wings are built in rib construction, have continuous pine spars and boxing with grooves, so that assembly on any flat building board is quick and easy. The trailing edge planking is also grooved so that nothing can go wrong with the position of the ribs. This also enables beginners in wooden model building to quickly create their own perfectly built and well-flying model. The wings are made of lasered wooden parts. All parts are precisely cut and require little reworking. Due to the simple and precise construction, model-relevant values ??such as V-shape or EWD are set automatically and do not have to be adjusted manually.

All optionally available wings can be attached to the fuselage as desired, without any tools but with strong magnet security. So a quick change is also possible on the airfield.

"Triple Neo speed" has a wingspan of approx. 181 cm, a simple V-shape and long ailerons. The profile has a straight underside, allowing for rapid flight and superb gliding aerobatics. The EWD has been slightly modified compared to the "Triple speed" model in the all-wood version, so that even faster flights are possible.

"Triple Neo RES" has a wingspan of approx. 200 cm and a higher V-shape than the "Triple thermal". The model is controlled only by rudder, elevator and spoilers.

"Triple Neo thermal" has a wingspan of approx. 258 cm and is equipped with ailerons and spoilers. The profile is designed for thermal flights and gives the model excellent flight performance. The wings of the triple series with wood fuselage also fit this new version.

The model kit contains all the laser-cut wooden parts for constructing the wings and tail units, white GfK fuselage and white canopy, the well-known aero-naut slipway, pine spars, rudder linkages and Bowden cables, various small parts. Detailed illustrated building instructions in the proven aero-naut 3D style lead to quick building success. A suitable spinner and center piece for folding propellers are also included in the kit. The clamping cone depending on the motor shaft is also required

Technical specifications:

Span: approx. 1,930 mm
Length: approx. 1200 mm
Wing area [dm²]: 36,3
Weight: about 870g
RC functions: Elevator, Aileron, Rudder, Motor Control
Construction difficulty: 3 / 5 (advanced)
Model design: wooden kit
Claim Flying: Advanced