Viewed products
HPI-160179
New product
Backorder (3 working days)
Warning: Last items in stock!
Availability date:
HPI Vorza S 1/8 Buggy Flux Brushless 4WD RTR
Recipient :
* Required fields
or Cancel
Scale | 1/8 |
Kit Type | RTR |
Field Type | Off-Road |
Wheel Drive | 4WD |
The wide buggy chassis allows all the components of the Vorza drivetrain and electronics to sit flat on the chassis, giving the buggy a very low profile and super low center of gravity for fantastic handling through turns and corners. The extra-thick 7075 aluminum chassis on the Vorza S features side dirt guards to keep rocks and debris away from the gears and driveshafts, and the front kick-up provides improved handling and steering over rough terrain and tracks. The Vorza Buggy is a dream to work on with everything easily accessible.
Providing the power for the Vorza S FLUX is an ultra-powerful FLUX brushless system, consisting of the HPI FLUX MLH-2200 motor and ELH-6S speed controller. On their own, they're already impressive, but together they form an unstoppable power force!
The FLUX MLH-2200 will give you more than enough power for anything you're looking for: giant air stunts, multiple back flips, colossal top speeds, and wheel-spinning sideways action! It also features our sleekest heatsink design, with 11 radial fins that circle the black-anodized motor case for superb cooling action. With a 5mm motor shaft it can fit any optional pinion gears for the Vorza so you can get even MORE top speed for those insane runs or gear it down for increased acceleration and jumping power on the track. 6.5mm bullet connectors on 12-gauge motor connector wires transmit maximum power from the speed controller for instant wheelie or dirt-throwing action. The FLUX MLH-2200 is held down to the 7075-aluminum chassis by a twin clamp style cast aluminum mount so it won't move or shift under the immense amount of torque it can pull. It also allows you to remove the motor without effecting the gear mesh.
Please see our note below recommending LiPo batteries above 4000mAh and 40C to get the most out of the electronics in the Vorza S FLUX.
The FLUX ELH-6S ESC is the perfect match for the FLUX MLH-2200 motor - with up to 150 amps of power on tap, you'll be able to do any big-air trick or stunt you can dream of!
The FLUX ELH-6S can handle twin 3S LiPo batteries (that's a total of 6S LiPo power!) so it can deal with anything the MLH-2200 motor can dish out! 6.5mm bullet connectors secure the motor wires for loss-free connection to the 12-gauge wires. A large fan sits on top of the heatsink inside a protective cover to keep things cool when the weather's warm.
Technical Specifications:
Input Voltage: 3-6S LiPo
Continuous Current: 150A
Burst Current: 950A
Resistance (?): 0.0035
Motor Limit: 4S LiPo <3000KV, 6S <2400KV
BEC: 6V/3A Switching BEC
Connector: 6.5mm Bullet
Dimensions: 59.5x48x42mm
Weight: 178g
Motor and Battery Combinations
The FLUX brushless motors requires very powerful batteries to get the most out of them - please make sure that you use the right combination! HPI highly recommend the use of LiPo batteries above 4000mAh and 40C. Using batteries with lower ratings, or the use of lower quality LiPo batteries, may cause damage to the battery and/or speed control. Using batteries below the specified ratings may void the warranty of the speed controller and/or batteries. The term Kv refers to the number of RPMs that the motors will try to deliver per volt applied and is a standard term for brushless motor power.
HPI-160179 VORZA S BUGGY FLUX
1/8th Scale 4WD Electric Buggy with FLUX Brushless System, 2.4GHz Radio System and Painted Body
SPECIFICATIONS:
Length: 508mm
Width: 205mm
Height: 178mm
Wheelbase: 325mm
Drivetrain: Shaft 4WD
WHAT YOU NEED:
2 matching Battery Packs with T-Plugs - HPI Plazma Li-Po batteries recommended!
Battery Charger, HPI Recommends:
Reactor 600 Charger - HPI-160236 (US), HPI-160237 (UK), HPI-160238 (EU), HPI-160239 (AUS)
Note: the battery packs required for the Vorza FLUX are two identical high-quality LiPo batteries with at least 4000mAh capacity and 40C discharge rate. A Single 4S or 6S Pack could be used with a bridging adaptor.
4 AA Batteries for Transmitter HPI-101939
We guarantee repairs to your radio equipment, from Drones, Cars, Helis, Planes or Boats, with its own workshop and specialized personnel. (static, radio control, electronic repair, etc.)
You can count on a service of excellence, with advice of accessories or parts adjusted to your needs and with the guarantee of the quality that our services offer.
We know that not everyone is experienced and often the first steps in radiomodelismo are obscure and difficult, but we are here to help and follow you in the evolution of your knowledge of this fabulous hobby.
Want to evolve your vehicle? Well, you can count on the best advice to do a complete upgrade, in phases or even to add the accessory that you want but do not have enough knowledge to apply it.
Count on us, count on free budgets, clear and without surprises in the end.
Purchased at SVModelismo or another shop, your vehicle is always well treated with our technicians and with a complete workshop.
Click here and bookmark a visit or ask for a free quote!
365,00 €
258,50 €
798,60 €
798,60 €
455,00 €
798,60 €
365,80 €
132,50 €
609,70 €
79,80 €
347,80 €
1 408,80 €
369,80 €
99,80 €
89,90 €
79,90 €
79,90 €
89,90 €
89,90 €
89,90 €
159,90 €
199,00 €
609,70 €
99,80 €
99,80 €
99,80 €
199,00 €
799,95 €
295,70 €
232,80 €