Udet Flamingo is one of the classics in the field of biplanes. The model was introduced by aero-naut in the early 1970s and was produced in almost unchanged form until recently. That was reason enough to give the model a completely new design for the company's 100th anniversary. This version is built entirely from laser parts and is suitable for 35mm electric motors. The construction technology and the components are now state-of-the-art. Additional ailerons were installed in the model and the wing construction was optimized.

The brushless motor is encased in a dummy radial motor made of laser parts and looks true to the original. The kit contains all the parts required for construction, including chassis and wheels, as well as modern 3D construction instructions. An optional pilot dummy (not included) gives the model an even more realistic look.

To control the rudders you need a total of 4 servos AN-12-MGBBA order no. 7003/74. The recommended drive is based on a 3s LiPo with 2400 mAh.

The kit contains:

All laser-cut wooden parts required for construction, linkage parts, chassis parts, wheels, various small parts, 3D construction instructions, building slipway, realistic dummy radial engine as a kit.

Technical specifications:

Span: approx. 1,310 mm
Length: approx. 910 mm
Weight: from approx. 1,870 g
Height: approx. 330mm
RC functions: Elevator, Rudder, Motor Control, Aileron
Construction difficulty: 3 / 5 (advanced)
Model design: wooden kit
Claim Flying: Advanced
Material hull: wood