Top sellers

Manufacturers

HPI Trophy 3.5 Nitro Buggy 1/8 Scale RTR

HPI-107012

New product

By order (5 - 6 working days)

292,52 €

Add to wishlist

Data sheet

Scale 1/8
Kit Type RTR
Field Type Off-road
Wheel Drive 4WD

More info

All HPI vehicles are equipped with a comfortable and feature-packed HPI 2.4GHz radio system for supreme control and confidence! The radio features a pistol-grip design with steering wheel for ease of use and realistic control, compact size, servo reversing and a light weight due to it requiring only four AA batteries. You won't have to worry about radio crystals or what channel other RC racers are using with our 2.4GHz technology - the radio does all that work for you! The radio prevents frequency conflicts automatically and changes channels if there is any interference. Finally, if you ever lose radio signal, an electronic failsafe will bring it to a safe and controlled stop. You'll have professional-level control in one easy RTR package!

The Nitro Star F3.5 V2 engine provides the grunt needed to get the Buggy 3.5 up to wild speeds - it's loud, it's powerful and it's strong, so you'll be able to rip off huge stunts like record-setting long jumps, backflips, tall jumps, even double backflips! The F3.5 V2 engine is lighter and more energy-efficient than the V1 engine used in the first Trophy buggy, so you'll get even BETTER acceleration and HIGHER top speeds!
 
The engine is started by a simple pullstarter system and is protected by a unique water splash cover and 2-stage air filter for extra protection, and the two-needle carburetor allows you to fine-tune the performance for any kind of weather or fuel. One added benefit of the Nitro Star F3.5 is that it's a race-legal .21-sizeengine, which means you can drop down to your local track or club and enter in a race as soon as you open the box!
  • 2.5 horsepower on tap
  • V2 Update: Lighter heatsink head for better power-to-weight ratio
  • V2 Update: Larger one-way bearing on pullstarter for increased durability
  • V2 Update: Taller heatsink head for increased cooling 
  • Race-legal .21 engine size
  • True ABC construction for long life
  • Composite carb construction helps prevent heat vaporization of fuel
  • Finned aluminum case
  • Huge aluminum heatsink
  • Tough pullstarter fitted standard
  • 2-stage air filter for extra engine protection
  • Splash cover over air filter keeps the engine from getting flooded with water in wet conditions
  • 2-needle carb adjustment for fine-tuning
On the inside, the F3.5 has true ABC construction, with a chrome-plated brass piston and cylinder surrounded by the lightweight aluminum case. To get you going quickly, the F3.5 uses a pullstarter system, and a large opening on the underside of the chassis allows you to utilise a starter box for even faster engine starting. If you want to upgrade to simple engine starting, just install the HPI-87130 Roto Start 2 engine starting system for push-button engine starting!

Chassis

The chassis of the Trophy Buggy 3.5 is made from 6061 aluminum for an excellent combination of strength and light weight. The low weight allows for faster acceleration, and the durability means you can have the confidence to pull off insane stunts and jumps!
 
To increase the chassis stiffness, it's fitted with metal rod braces front and rear - this allows the suspension to do all the work it's designed to do for improved driving feel and control without chassis twist or bending getting in the way.
 

Drivetrain

The drivetrain used in the Trophy 3.5 buggy is a full-time four-wheel drive shaft-type drivetrain. The shaft drivetrain is the best option for a kit that's expected drive through mud, water, dirt, grass, snow or gravel! The entire drivetrain is supported by high quality ball bearings for extra efficiency, so you get the the maximum speed and acceleration possible, and the most out of every tank of fuel! A steel spur gear takes the power from the engine and transmits it through a central differential, which transfers power to the front and rear diffs by long central driveshafts. The front and rear bevel differentials use 4 internal gears for excellent durability over standard 2-gear diffs. The diff outdrives turn tough steel outdrives and axles, and 17mm orange anodized aluminum hex adapters spin the 7-spoke wheels, which are wrapped with Team HB Proto design rubber racing tires. To bring the Trophy to a safe and controlled stop, dual drilled steel disc brakes with fiber brake pads are used. The brake pads use material from full-size truck brakes, bringing the Trophy to a quick yet controllable stop. All the brake linkage is fully adjustable for extra tuning power on the track.
 

Suspension and Steering

The Trophy Buggy 3.5 is fully equipped with a real racing suspension to give you the driving feel and responsiveness of the pros! Long suspension arms at each corner are made from thick, impact-resistant plastic and webbed for extra strength. The shocks feature aluminum bodies and caps for extra durability and are oil-filled with rubber bladders and protective boots over the thick shock shafts. For pro-level race tuning, you have complete control over the suspension geometry of the Trophy buggy. The shocks can be moved at the top and bottom to get the perfect positioning to help you set fast laps race after race. The camber links front and rear also have extra holes to adjust roll center and gain valuable seconds out on the track, and the links themselves are strong steel turnbuckles so you can easily adjust the angle of the tires.
 
If you don't want to make any changes and just get out and drive, that's fine too! Absolutely everything is factory-fitted right out of the box, so you don't have to change a thing if you want to just start up the Trophy Buggy 3.5 and have some fun.

Performance Straight From the Box

HPI makes it as easy as possible to get into RC racing action. The RTR Trophy Buggy 3.5 is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals - diffs, shocks, suspension and more are perfect before you even open the package. You don't have to do a thing to get going fast! HPI Ready-To-Run vehicles bring you the same high performance and quality that you'd expect from a high-end RC kit but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC car straight from the box!

Full Assembly Instructions

Just like all HPI cars and trucks, you get a full, in-depth instruction manual with step-by-step instructions that allow you to easily disassemble and reassemble your car for maintenance and easy servicing. The manual also includes a handy parts list and full-scale drawings of the parts and hardware. 

Features 

  • Factory-assembled & pre-painted 4WD nitro racing buggy
  • 2.4 GHz radio system for crystal-free, comfortable control
  • Waterproof laydown steering servo for low CG and awesome handling
  • Waterproof throttle/brake servo
  • Enclosed receiver/battery box protects battery and receiver from the elements
  • Covered air filter keeps water away from the air intake
  • Low centre of gravity (CG) design for great track performance
  • Strong and reliable Nitro Star F3.5 engine with 2.5hp
  • Strong engine mount and large flywheel opening for starter boxes
  • Easy and simple pullstarter for instant action
  • 4mm 6061 aluminum chassis has angled sides for extra stiffness
  • Thick 6061 aluminum shock towers are strong and durable
  • Thick steering brace for increased chassis stiffness
  • Low-profile aluminum radio tray securely mounts servos
  • Race-tuned suspension design for awesome traction
  • Extra-long, oi-filled shocks with aluminum shock bodies
  • Multiple shock and camber link locations for extra race tuning
  • Steel turnbuckle links allow you to custom-tune the ride
  • Tough front bumper protects against crash damage
  • Extra-large 160cc fuel tank gives you plenty of runtime
  • Powerful, adjustable & vented front and rear steel disk brakes
  • Strong fiber brake pads for longevity and fade resistance
  • HB Proto tires look fantastic on black chrome wheels
  • Intelligent fuel line routing to keep things neat and tidy
  • Cast aluminum steering knuckles for increased strength
  • 17mm hex hubs resist stripping out and are hollow for light weight
  • Slick racing bodyshell is prepainted and cut out for instant race looks
  • Adjustable mounts for the wide racing wing
  • Extra suspension mounts included for tuning options

HPI-107012 RTR TROPHY 3.5 BUGGY W/ 2.4GHz

1/8th Scale 4WD Nitro Buggy with Nitro Star F3.5 engine, 2.4GHz Radio System and Painted Body

SPECIFICATIONS

Length: 518mm
Width: 300mm
Height: 180mm
Track: 280mm
Wheelbase: 333mm
Drivetrain: Shaft 4WD

WHAT YOU NEED

Nitro Car Fuel
Fuel Bottle
Glow Plug Igniter
HPI-110605 Nitro Starter Pack includes everything you need, just add fuel!

INCLUDES

4 AA Batteries for Transmitter
4 AA Batteries for Receiver Pack

Comunicado COVID-19

COVID-19 ANNOUNCEMENT (NEW CONFINMENT)
EXCEPTIONAL MEASURES OF PREVENTIVE ORDER

Dear friends,

Given the situation triggered by the evolution of the latest events, concerned with preventing further spread in time of Covid-19, our physical stores in Lisbon and Amadora will be closeduntil next January 30th.

OUR ONLINE STORE WILL CONTINUE WORKING NORMALLY.

Thus, beginning on January 15th, orders accepted on our website will be dispatched on Tuesdays and Thursdays of each week, with the estimated delivery time being no more than 2 working days. This is as long as the current containment measures are maintained and the transport services operate normally, as long as stocks of stock permit.

During this period, a single telephone line works: 917606615
All others will be inoperative.

Thus, we appreciate that all contacts are preferably made by email:
geral@svmodelismo.net

In this more difficult way of working, some lapses can happen, so we ask for your understanding.

We live in unique and difficult times for everyone, which only with mutual assistance can we win. It is not too much to remember that it is a widespread problem common to all. We must therefore take all possible precautions, protecting ourselves individually and collectively.

We look forward to returning to your company, and to normal work quickly.

Cordial greetings.

SVMODELISMO

The management

30 other products in the same category: