Mais Vendidos

Produtos visualizados

Fabricantes

Tamiya 1/8 Dancing Rider Trike T3-01

TAM300057405

Novo produto

Por encomenda - 7 dias uteis

99,80 € IVA inc.

Adicionar à Lista de desejos

Ficha informativa

Escala 1/8
Tipo de Kit KIT
Tipo de Terreno On-road
Tracção 2WD

Mais informação

Tamiya presents a completely new concept with the Trike T3-01! The trike in 1/8 scale is fully movable and is thus controlled by the curves. The front and rear unit is controlled by a servo for the steering movements. The model was created based on the many courier vehicles in pizza services, etc. ..

This radio control model replicates delivery trikes widely seen making deliveries in Japan. When the model turns, the 3-wheel chassis "leans" into the corner much like their full-size counterparts. The 3-wheel chassis features the motor in the rear section, with the battery in the front. The two sections are linked in the middle, and a steering servo leans the entire front section left and right to effect turns. Furthermore, support arms are linked to the steering servo, and help to right the model if it happens to tip over.


Lord of the Dance
This R/C model assembly kit creates the Dancing Rider, a supremely fun 3-wheeled model that offers an exciting lean when cornering. An original body is included with the kit, and was designed under the supervision of famed Japanese artist Atsushi Arino. It is molded in lightweight polycarbonate, and comes with a molded driver figure for an extra touch of fun.

T3-01 Chassis: Designed for Fun
The T3-01 is a three-wheeled chassis comprised of two main sections (front and rear) connected by a center link; the front section houses R/C equipment and the power source, while the rear holds the integrated gearbox and motor. Positioned in the back of the front section, the servo applies motion to the rear section, which in turn makes the front lean. Support arms are moved by the servo, and help the model to self-right in the event that it turns onto its side. At the front, a telescopic fork has a built-in coil spring, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the built-in coil spring to cushion the rear. A planetary differential gear is integrated into the rear axle.

Specifications
★Length: 260mm
★Width: 135mm
★Height: 175mm
★Wheelbase: 196mm
★Tread (Rear): 91mm
★Tire Width/Diameter 21/61mm (Front), 25/59mm (Rear)
★Monocoque Chassis
★Rear-Wheel Drive
★Planetary Differential Gear
★Front Suspension: Telescopic Fork
★Rear Suspension: Cam-Slide
★Gear Ratio = 10.7:1
★Requires an Electronic Speed Controller (sold separately)
★Type 370 Motor included

Separately Required Items
★2-Channel R/C System w/ESC
★R6/AA/UM3 batteries for transmitter
★Power source

Oficina

REPARAÇÕES - MANUTENÇÕES - UPGRADES

Garantimos as reparações no seu equipamento de radiomodelismo, desde os Drones, Carros, Helis, Aviões ou Barcos, contando com uma oficina própria e pessoal especializado. (estático, rádio controle, reparação electrónica, etc.)

Pode contar com um serviço de excelência, com aconselhamento dos acessórios ou peças ajustado às suas necessidades e com a garantia da qualidade que os nossos serviços oferecem.

Sabemos que nem todos são experientes e muitas vezes os primeiros passos no radiomodelismo são obscuros e difíceis, mas estamos cá para o ajudar e acompanhar na evolução do seu conhecimento deste fabuloso hobby.

Quer evoluir o seu veículo? Pois conte connosco no melhor aconselhamento para fazer um upgrade completo, por fases ou mesmo para acrescentar o acessório que tanto quer mas não tem o conhecimento suficiente para o aplicar.

Conte connosco, conte com orçamentos grátis, claros e sem surpresas no final.

Comprado na SVModelismo ou noutra loja, o seu veículo é sempre bem tratado com os nossos técnicos e com uma oficina completa.

Clique aqui e marque já uma visita ou peça o seu orçamento grátis!

30 outros produtos na mesma categoria: